|
|
|
|
|
|
Name
|
|
FG Monster Truck
|
|
|
|
|
|
Extended Description
|
|
The 1:6 RC Petrol Monster Trucks are built on the same chassis as the 1:6 scale Marder or Beetle models. In addition the chassis parts are mounted on a 4mm-thick angled alloy plate. All borings on the bottom side are countersunk to prevent the screw heads from bearing out. You can adjust toe-in or toe-out at the front axle through track rods with a right or left-handed thread. On the rear axle you can adjust king pin angle and toe-in using adjusting screws with a right or left-handed thread.
Eight oil-filled shock absorbers are mounted around the truck at the lower double wishbones of the front and rear axles, which can absorb heavier bumps to a greater extent and ensure optimal wheel grip. All rotating parts are supported by ball bearings. Rear gearwheels, differential gears as well as driving elements are case-hardened.
The two-piece body is manufactured from transparent polycarbonate. The chromed rims are in one piece in order to reduce weight. The tyres have a fabric insert to prevent tyre extension to a large degree due to centrifugal forces at increasing r.p.m.
The models are equipped with a powerful 26ccm combustion engine. It needs an ordinary 2-stroke petrol-oil mixture. The fuel tank capacity of 0.7 litres gives you about 45 minutes of driving fun. Using the integrated pull-start system the engine can be started without any problems.
Radio Gear Sold Separately.
|
|
|
|
|
|
Price
|
|
£649.00
|
|
|
|
|
|
|
|
|
|
|
|
|
